• L4000 Fingerprint Lock with Password and Card

     

    Multi-Factor Identification Methods
    Support four identification mode which includes – fingerprint, password, RFID card and mechanical key or any combination.

    Rugged Sensor Technology
    Non-coating optical fingerprint sensor and cutting edge fingerprint matching technology.

    Versatile Application and Reliable Mechanism
    Strong stainless steel bar latch – suitable both for the main entrances as well as other doors.
    Keep visitor mode in Unlock-status if it is activated.

    Robust Mechanical Structure
    Pure stainless steel mechanical rotating structure with nanotechnology, which makes it last for many years under normal usage.

    Easy Installation and Operation
    No wiring required – Standalone installation. Data transfer to and from PC can be done using USB flash disk. User registration and various settings can be done directly at the lock using OLED display.

    Extended Battery Lifetime
    Lock is powered by four standard alkaline 1.5 V batteries which can last for up to 5000 unlocking activities. The OLED display will show the status of the batteries power level.

    Read moreShow details

  • KR102E/KR102M RFID card Reader

    Introduction:

    KR102E: 125KHz Proximity card reader with keypad

    KR102M: 13.56MHz Mifare card reader with keypad

    Features:

    ．125KHz Proximity /13.56MHz mifare Card Reader or PIN
    ．Read Range: Up to 10CM(125KHz)/5CM(13.56MHz)
    ．Output format
    ．Card: 26/34bit Wiegand (default)
    ．PIN: 8 bit for PIN output format
    ．External LED Control
    ．External Buzzer Control
    ．Indoor / Outdoor Operation
    ．Reverse Polarity Protection

    Read moreShow details

  • KR100E/KR100M RFID card Reader

    Introduction:

    KR100E: 125KHz Proximity card reader

    KR100M: 13.56MHz Mifare card reader

    Features:

    ．125KHz Proximity /13.56MHz Mifare Card Reader
    ．Read Range: Up to 10CM(125KHz)/5CM(13.56MHz)
    ．26/34bit Wiegand (default)
    ．External LED Control
    ．External Buzzer Control
    ．Indoor / Outdoor Operation
    ．Solid Epoxy Potted
    ．Waterproof IP65
    ．Reverse Polarity Protection

    Read moreShow details

  • SCR100 RFID card reader for access control

    ID card Capacity 30,000
    Transaction Capacity 50000
    Communication TCP/IP, RS232/485, USB-Host
    Access Control Interface for 3rd party electric lock, door sensor, exit button, alarm, Door Bell
    Wiegand Signal Output & Input
    Standard Functions Anti-passback, Webserver, 9 digital numbers
    Optional Functions Mifare, HID
    Power Supply 12V DC
    Operating Temperature 0 ℃- 45 ℃
    Operating Humidity 20%-80%
    Dimension  (L*W*H) 153×95.5×35.5mm
    Gross Weight .8 kg

    Read moreShow details

  • (F18-C ) finger print Access control device

     

    Fingerprint Capacity 3000 Templates
    Card Capacity 5,000 (Optional)
    Transaction Capacity 30,000 Transactions
    Sensor ZK Optical Sensor
    Algorithm Version ZK Finger VX9.0&10.0
    Communication RS232/485, TCP/IP, USB-host
    Access Control Interface 3rd Party Electric Lock, Door Sensor, Exit Button, Alarm, Doorbell
    Wiegand Signal Input and Output
    Display TFT LCD Color Screen
    Interface Styles Common, Matrix and Magic styles
    Standard Function Webserver, Anti-passback
    Optional Function ID Card, Mifare Card
    Power Supply 12V DC,3A
    Operating Temperature 0 ℃– 45 ℃
    Operating Humidity 20%-80%
    Dimension(WxDxH) 80*183*42mm

    Read moreShow details

  • ZK TECO Finger print (TF1700 or F16)

     

    Fingerprint Sensor ZK Optical Sensor
    Algorithm Version ZKFinger V10.0
    Communication TCP/IP, RS485
    Fingerprint Capacity 3,000 Fingerprints
    Card Capacity 30,000 Cards
    Log Capacity 100,000 transactions
    RF Card EM(standard)/Mifare(optional)
    Wiegand Signal Wiegand in & out
    Ingress Protection Rate IP65
    Operating Voltage 12VDC 3A
    Operating Temperature 0℃~ 45℃ (32°F ~ 113°F)
    Size 62.5mm × 185mm × 41.5mm (W × H × D)
    Share

     

    Read moreShow details

  • HIKVISION NETWORK CAMERA

    Camera Specification
    Image Sensor: | 1/3″ Progressive Scan CMOS
    Signal System: | PAL/NTSC
    Min. Illumination: | 0.07Lux @ (F1.2, AGC ON), 0 Lux with IR
    Shutter time: | 1/3 s to 1/100,000 s
    Lens: | 4mm@ F2.0 (6mm, 12mm optional)
    2048 × 1536:
    Angle of view: 70°(4mm), 43.3°(6mm), 20.6°(12mm)
    1920 × 1080:
    Angle of view: 79°(4mm), 49°(6mm), 23.2°(12mm)
    Lens Mount: | M12
    Auto Iris: | DC drive
    Day& Night: | IR cut filter with auto switch
    Wide Dynamic Range: | Digital WDR
    Digital noise reduction: | 3D DNR
    Compression Standard
    Video Compression: | H.264/MJPEG
    Bit Rate: | 32Kbps~12Mbps
    Dual Stream: | Yes
    Image
    Max. Image Resolution: | 2048×1536
    Frame Rate: | 50Hz: 20fps (2048 × 1536), 25fps (1920 × 1080), 25fps (1280 × 720)
    60Hz: 20fps (2048 × 1536), 30fps (1920 × 1080), 30fps (1280 × 720)
    Image Settings: | Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
    BLC: | Yes, zone configurable
    ROI: | Support
    Network
    Network Storage: | NAS (Support NFS,SMB/CIFS)
    Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
    Protocols: | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
    PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour
    Security: | User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask
    System Compatibility: | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI
    Interface
    Communication Interface: | 1 RJ45 10M / 100M ethernet interface
    Reset Button: | Yes
    General
    Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F)
    Humidity 95% or less (non-condensing)
    Power Supply: | 12 VDC ± 10%, PoE (802.3af)
    Power Consumption: | Max. 5 W (Max. 7 W with IR cut filter on)
    Weather Proof: | IP66
    IR Range: | -I: Approx 20 to 30 meters(65.6-98.4ft)
    Dimensions: | 60.4×76.9×139.28 mm (2.4” × 3.0” × 5.5”)
    Weight: | 500g (1.1 lbs)
    Read moreShow details

  • SAMSUNG CAMERA (SCO-2120R)

    The SCO-2120R from Samsung features the W-V DSP chipset to deliver dvanced functionality such as 600TVL resolution, coaxial control compatibility, Samsung SuperDynamic Range (SSDR) and third generation Samsung Super Noise Reduction (SSNRIII), which eliminates image noise in low light conditions without creating motion blur or ghosting.

    Complete with a 12x zoom lens, the SCO-2120R benefits from timed resets to enable the zoom function to operate automatically at pre-determined times during the day. This can be set-up effortlessly via the coaxial cable from a compatible DVR.
    The SCO-2120R is housed in a full weatherproof casing rated to IP66 with integrated sunshield and supplied with a mounting bracket that allows the camera to be installed either wall, surface or ceiling mount to ensure the required field of view can be obtained every time.• 12x optical zoom (3.9 ~ 46mm)
    • Equipped with high performance Adaptive Illumination IR LEDs
    • 70m monitoring range
    • Dustproof & waterproof integrated camera housing rated to IP66

    Read moreShow details

  • Dual-Sided ID Card Printer Model ZXP Series 8

     

    • 304 dpi/12.0 dots per mm print resolution.

    • Dye sublimation retransfer.

    • Full color or monochrome retransfer printing.

    • Single- and dual-sided printing.

    • Max print speed single-side 190 cph.

    • Max print speed dual-sided 180 cph.

    • Over-the-edge printing on standard CR80 media.

    • USB and Ethernet connectivity.

    • Single-card feed capability.

    • 150 card capacity feeder (30 mil).

    • 15 card reject hopper (30 mil).

    • 100 card output hopper (30 mil).

    • Auto-calibration of media.

    • 21-character, 6 line LCD operator display.

    • Card thickness: 30 – 40 mil.

    Read moreShow details